How to play

Build · Pick a level on the map. Each step shows what you need; fit the parts on your bench, then press Done ✓ (or Enter). ← / → move between steps. Open in Bambu loads a part's print file into Bambu Studio — opening is not printing.

Walk · The recorded demo trot: Play, speed and the timeline are at the bottom. Space plays / pauses.

Mouse / touch · Drag to orbit. Scroll or pinch to zoom. Right-drag or two-finger drag to pan. Click a part to inspect it; double-click to focus.

In VR · The robot stands on a bench in front of you: the level panel on your left, the guide on your right, the control console below it. Pick a level, build each step and press ✓ Done. Point at a glowing part and pull the trigger to find it for bonus XP and stars. Press either thumbstick to fly: walk around the robot, look under it, or make it a 10× giant. Levels, XP and stars are notes in this headset, not a verdict about the robot; opening a part is not printing it.

VR controls · Trigger: panel buttons, pick a part, drag the parts slider. Grips: move the model; both hands scale and turn it. Right stick: step (Build) or scrub (Walk); up / down spreads the parts. Left stick: turn or resize the model. A / B: next / previous step (Walk: play / restart). X: reset the model. Y: switch Build ↔ Walk. Press either stick to fly: left stick moves where you look, right stick turns 30° and moves up / down; press again to land.

In AR · Build in AR shows only in a headset browser that supports passthrough AR (Quest 3 / 3S via make quest). It puts the current step of your level on your real bench at 1:1: place the bench, then follow the ghost parts, screw and insert markers and the step card, and press Done. Treat it as guidance only. The overlay is good to about ±1 cm and cannot tell one M2.5 hole from the next, it does not check fit, and a finished level is a note in this headset, not a gate. Counts come from the CAD and can differ from the build notes, so count the holes on your part.

Keyboard · Enter done · ← / → steps · + / − zoom · F focus · R reset view · Esc close / clear. Panels hides the side panels for more room.